Motorcycle Towing Caddy
Motorcycle towing
caddy is used for towing a motorcycle by its front wheel
|
Motorcycle
towing caddy is used for towing a motorcycle by its front wheel using your
hitch
receiver. It loads safely on the ground and has a crank to lift it up to towing
height
after you have tied it down. No need for a trailer.
Most bikes have about 50% of their weight on the hitch which is great for light
suspension
tow vehicles. Large bikes have about 70%. The spreader bar with tie downs helps
lock the front
end of the motorcycle, so it pivots at the hitch with no leaning.
Great for dirt, sport, or street bikes up to a small Harley or touring bike
under 800 pounds.
RHMC1SV
RECEIVER HITCH
MOTORCYCLE TOWING CADDY
THIS MOTORCYCLE TOWING CADDY SWIVELS
AT THE HITCH, SO BIKE TRAVELS TRUE WITH OUT LEANING.
IT WORKS WELL WITH
BIGGER
BIKES, CHOPPERS AND TRIKES, AND TOWS GREAT BEHIND
ANY RV OR PICK UP !
THE CADDY ALSO INCLUDES A CLAMP ON SPREADER BAR WITH TIE DOWN LUGS, MAKES
FOR EASY AND FAST TIE DOWN !
RHMC1SV
Motorcycle Caddy
* Unit fits standard 2 inch class #3 or #4 receiver hitch.
* Units uses 3-1500 lb. built in ratcheting wheel straps to wedge the front tire
securely into the V shaped wheel cage.
* Unit has built in jack. cranks down for loading, and cranks up and
locks for
road travel.
* Front tire wedges in the V shaped wheel cage and holds bike upright for you
while you tie it down.
* Made from all structural square tubing, main jack 2 1/2" x
2 1/2"
square tube
wheel cage 1 1/4" x
1 1/4" square tube.
* Unit works with tires sizes
16" to 21"
Hitches lower than 16"
will require an lifting adapter.
$499
Inckudes Shipping
To
Order Call
888 572-7959
|
Motorcycle Factory Direct Click Picture
|
